|
Professional Water Sealant is recognized as an industry standard by architects, engineers, contractors, and building owners for its superior above grade water repellent capabilities. It is an extremely long lasting, penetrating, water repellent product formulated by using RTV silicone rubber.
Don't Risk Costly Call Backs...
Use the Proven winner
- Silicone Rubber Formulation
Inorganic and non-sacrificial so it doesn't break down due to the elements.
- Transparent
Dries to a clear, flat finish.
- Quick Drying
Cures for foot traffic within 2 hours.
- Seals Any Porous Substrate
Developed for use on above grade horizontal and vertical surfaces such as: brick, block, concrete, and stone.
- Complies with
EPA, CARB, and Northeast Ozone Transport Commission regulations regarding Volatile Organic Compound (VOC) content for Architectural and Industrial Maintenance Coatings.
- Easy to Apply
Spray, roll or brush.
Your Project Deserves a Silent Partner That is
Still Working Years After the Job is Complete
- Long Lasting Waterproofing Protection
Penetrates into the capillary system to permanently bond with the substrate.
- Durable..Non-Sacrificial
Because silicone rubber is inorganic, there is no deterioration from ultraviolet rays, ozone, salt spray, acid rain, etc.
- 400% Elongation
Expands and contracts with building movements and temperature extremes...bridging hairline cracks.
- Breathable...High Perm Rate
Allows moisture vapor to escape while prohibiting liquid penetration..prohibits freeze/thaw damage.
- 5 & 10 Year Extended Warranties Available
If the product fails, we replace it at no cost to you.
Available in Three Formulations
- PWS-5 Regular Strength
Brick, Concrete, Granite, Terra Cotta
- PWS-8 Extra Strength
Very Porous Brick and Concrete, Seasoned Wood, Stucco, Adobe, Sandstone, Limestone
- PWS-15 Super Strength
Split Face, Fluted, Smooth Masonry Block
|
